ADDRESS:Bldg A8, Xiashiwei 1st Industrial Zone
Fuyong, Baoan District, Shenzhen, Guangdong, PRC
Card dispensing, support ISO15693 RFID card reading and writing
RFID reading- Support RFID card reading
Extendable card hopper - Max loading 300pcs (card thickness 0.76mm).
Card adjustment rotator-Support thickness 0.2-2.0mm
Patent No. : 200620148190.2-Six optional card thickness adjustment.
Smart alert status - Support card empty, dispensing trouble alert.
Error card box - For error card collecting (25pcs) and can be hollowed to collect more.
Super card dispensing ability -Special card rubbing wheel structure and abrasion resistant rubber material ensures dispensing card successfully at one time.
Multiple machine communication-One port of RS232 interface can control 16 set of equipment.
·Parking lot management system
·Hotel self check system
·Subway or public transportation card issue
·Park ticket vending system
·Library kiosk 15693 card dispensing
1）When opening host machine or cabinet to repair, power connected with card dispenser must be shut off to avoid damage machine.
2）Be careful of the difference of power positive and negative in the first power-on.
3）Notice the jumping line explanation in the first use. Wrong jumping line may cause machine unable to work or uncertain status.
4）Forbid hot-plugging connecting socket in the port. Hot-plugging is easy to damage control circuit.
5）Keep card dispenser clean, no oil. Greasy binder may damage the performance of card dispenser greatly.
6）There is a red hand-operated soft reset button at the rear down position of card dispenser body side. Field operator can adjust by hand when there is error or abnormal condition in the field operation. In normal condition please do not use it.
7）Resetting button can be used to sort cards in stacker and reclaim cards hand-operated.
8）Resetting button has overtime protection. Hold and press the button, motor will stop operating automatically to protect motor.
1）Our products have one year free warranty. Warranty period starts from the date that users receive products.
2）Repairing method is that users send products to our factory for repairing.
3）After the warranty period, our company will still provide after sale service. In case it is involved with replacing parts, our company will charge a certain material cost. But for the below condition even in the warranty our company will charge a certain repairing fee in repairing.
a) Damage or trouble caused by human error after purchase;
b) Damage or trouble caused by operation of unprofessional technician;
c) Damage or trouble caused by unstable outer power or voltage;
d) Trouble and damage caused by force majeure such as earthquake etc.